> > Stuart Turner Floatswitch
Stuart Turner Floatswitch

Stuart Turner Floatswitch

£57.00

  excl. VAT

  • General Description

    The Stuart Float Switch is designed for simple, reliable control of a pump dependent on the water level in a tank or sump. The Stuart Float Switch can be used to control a pump for either tank filling (a high level cut out) or tank emptying (a low level cutout). It is easily achieved by the positioning of the float cord at the time of assembly.

    • The Stuart Float Switch is designed for simple, reliable control of a pump dependent on the water level in a tank or sump. The Stuart Float Switch can be used to control a pump for either tank filling (a high level cut out) or tank emptying (a low level cut out). It is easily achieved by the positioning of the float cord at the time of assembly. Settings to alter changes in liquid level are adjustable between a range of 50 to 700 mm using clips on the float cord. All electrical connections are made inside the box on a terminal strip. Two cable glands are provided that are also suitable for M20 conduit if required. Reliable, easy to install and simple wiring make the Stuart Float Switch second to none. The electrical contact is made using a micro switch, activated by the rocking motion of the lever due to the rise and fall of the float. All other parts of the switch are made from plastic, specially stabilised against ultra violet rays from the sun for long life in hot climates. Weights are in brass. Movement of the float is transmitted via easily adjustable stops on the cord set to the operating lever, ensuring a positive make or break action. A 1 metre nylon cord is provided as standard. The standard plastic float (62 mm dia.) is suitable for water only up to a maximum temperature of 50°C.
  • Stuart FS Data Sheet
    Stuart FS Inst Instructions